How hard is the water in Irondale, AL?
Reported by Birmingham Water Works Board · March 2025
- AL typical
- 73 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
Irondale water measures 79 mg/L (4.6 gpg) of hardness, moderately hard by USGS standards. The number comes from Birmingham Water Works Board, dated March 2025. Reports for this system disagree, with values from 62 to 79 mg/L.
Irondale sits close to the typical Alabama figure of 73 mg/L. Of the 10 nearest cities we track, 5 have softer water and 5 have harder. The range nearby runs from 77 mg/L in Mountain Brook to 169 in Pelham.
What 79 mg/L means at home
You may see faint white spots on glasses and shower doors after the water dries.
Scale builds up slowly. A kettle or coffee maker needs descaling now and then, maybe every few months.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
Optional. Plenty of households at this level live with it and descale the kettle now and then.
Water softener
Worth a look if spots on glass bother you, or if your tankless water heater manual asks for softer water.
Carbon filter
Improves taste and removes chlorine. It leaves calcium and magnesium in place.
3 people × 75 gallons a day × 4.6 gpg = 1,035 grains a day. A 24,000-grain unit regenerates about every 23 days.
EPA record for Irondale's water system
No health-based violations since 2016
Serves about 10,098 people from groundwater.
- Health-based
- 0
- Monitoring or reporting
- 1
- Open now
- 0
EPA lists Irondale Water System as the system serving Irondale. The hardness figure above comes from a different system's report, which TapWaterData uses for Irondale.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Irondale water hard?
Somewhat. It measures about 79 mg/L (4.6 grains per gallon), which the USGS classes as moderately hard.
What is the water hardness in Irondale in grains per gallon?
About 4.6 gpg. One grain per gallon equals 17.1 mg/L, so 79 mg/L divided by 17.1 gives 4.6.
What size water softener do I need in Irondale?
For 3 people using 75 gallons each per day, 4.6 gpg works out to about 1,035 grains a day. A 24,000-grain softener covers that with a regeneration about every 23 days.
Has the Irondale water system had EPA violations?
EPA records show no health-based violations for Irondale Water System since 2016. There were also 1 monitoring or reporting violation, which are about late or missing tests and notices.
Nearby cities
- Leeds147 mg/LHard
- Mountain Brook77 mg/LModerately hard
- Center Point77 mg/LModerately hard
- Birmingham77 mg/LModerately hard
- Trussville155 mg/LHard
- Homewood77 mg/LModerately hard
- Forestdale77 mg/LModerately hard
- Pelham169 mg/LHard
- Springville149 mg/LHard
- Odenville124 mg/LHard
Hardness data: TapWaterData US Water Hardness (utility report, March 3, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.