Hard water in Culver City, CA
Reported by Los Angeles-City, Dept. of Water & Power · October 2025
- CA typical
- 121 mg/L
- EPA health violations since 2016
- 2
- Softener for 3 people
- 24k grain
- Data
- Utility report
Tap water in Culver City has about 122 mg/L of hardness, which is 7.1 grains per gallon. On the USGS scale that counts as hard. The number comes from Los Angeles-City, Dept. of Water & Power, dated October 2025. Reports for this system disagree, with values from 95 to 122 mg/L.
Culver City sits close to the typical California figure of 121 mg/L. Of the 10 nearest cities we track, 5 have softer water and 3 have harder. The range nearby runs from 57 mg/L in Santa Monica to 195 in Inglewood.
What 122 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 122 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 7.1 gpg = 1,600 grains a day. A 24,000-grain unit regenerates about every 15 days.
EPA record for Culver City's water system
2 health-based violations since 2016
Serves about 3,875,566 people from surface water.
- Health-based
- 2
- Monitoring or reporting
- 2
- Open now
- 0
TapWaterData ties Culver City to this system. EPA's service-area records do not name Culver City, so check the utility printed on your water bill.
| Contaminant or rule | Violations | Period | Status |
|---|---|---|---|
| Surface Water Treatment Rule (LT2)filtration and disinfection | 1 | 2018 | Resolved |
| Groundwater Ruletreatment of well water | 1 | 2016 | Resolved |
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Culver City water hard?
Yes. It measures about 122 mg/L (7.1 grains per gallon), which the USGS classes as hard.
What is the water hardness in Culver City in grains per gallon?
About 7.1 gpg. One grain per gallon equals 17.1 mg/L, so 122 mg/L divided by 17.1 gives 7.1.
What size water softener do I need in Culver City?
For 3 people using 75 gallons each per day, 7.1 gpg works out to about 1,600 grains a day. A 24,000-grain softener covers that with a regeneration about every 15 days.
Has the Culver City water system had EPA violations?
EPA records show 2 health-based violations for Los Angeles-City, Dept. of Water & Power since 2016, involving Surface Water Treatment Rule (LT2), Groundwater Rule. There were also 2 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Los Angeles121 mg/LHard
- Ladera Heights122 mg/LHard
- View Park-Windsor Hills122 mg/LHard
- Marina del Rey121 mg/LHard
- Inglewood195 mg/LVery hard
- Beverly Hills121 mg/LHard
- Lennox185 mg/LVery hard
- Santa Monica57 mg/LSoft
- West Hollywood121 mg/LHard
- Del Aire185 mg/LVery hard
Hardness data: TapWaterData US Water Hardness (utility report, October 6, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.