Hard water in Pleasure Point, CA
Reported by Santa Cruz Water Department · October 2025
- CA typical
- 121 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
Pleasure Point water measures 132 mg/L (7.7 gpg) of hardness, hard by USGS standards. The number comes from Santa Cruz Water Department, dated October 2025.
Pleasure Point sits 11 mg/L above the typical California figure of 121. Of the 10 nearest cities we track, 2 have softer water and 6 have harder. The range nearby runs from 98 mg/L in Rio del Mar to 215 in Watsonville.
What 132 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 132 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 7.7 gpg = 1,732 grains a day. A 24,000-grain unit regenerates about every 13 days.
EPA record for Pleasure Point's water system
No health-based violations since 2016
Serves about 94,626 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 1
- Open now
- 0
TapWaterData ties Pleasure Point to this system. EPA's service-area records do not name Pleasure Point, so check the utility printed on your water bill.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Pleasure Point water hard?
Yes. It measures about 132 mg/L (7.7 grains per gallon), which the USGS classes as hard.
What is the water hardness in Pleasure Point in grains per gallon?
About 7.7 gpg. One grain per gallon equals 17.1 mg/L, so 132 mg/L divided by 17.1 gives 7.7.
What size water softener do I need in Pleasure Point?
For 3 people using 75 gallons each per day, 7.7 gpg works out to about 1,732 grains a day. A 24,000-grain softener covers that with a regeneration about every 13 days.
Has the Pleasure Point water system had EPA violations?
EPA records show no health-based violations for Santa Cruz Water Department since 2016. There were also 1 monitoring or reporting violation, which are about late or missing tests and notices.
Nearby cities
- Capitola132 mg/LHard
- Live Oak147 mg/LHard
- Soquel132 mg/LHard
- Santa Cruz147 mg/LHard
- Rio del Mar98 mg/LModerately hard
- Aptos98 mg/LModerately hard
- Scotts Valley148 mg/LHard
- Watsonville215 mg/LVery hard
- Interlaken215 mg/LVery hard
- Los Gatos178 mg/LHard
Hardness data: TapWaterData US Water Hardness (utility report, October 5, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.