Hard water in Danville, IN
Reported by Citizens Water - Indianapolis · August 2025
- IN typical
- 178 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
Tap water in Danville has about 178 mg/L of hardness, which is 10.4 grains per gallon. On the USGS scale that counts as hard. The number comes from Citizens Water - Indianapolis, dated August 2025.
At 178 mg/L, Danville is close to the typical Indiana figure of 178 mg/L. None of the 10 nearest cities we track has softer water. The range nearby runs from 178 mg/L in Avon to 272 in Lebanon.
What 178 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 178 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 10.4 gpg = 2,342 grains a day. A 24,000-grain unit regenerates about every 10 days.
EPA record for Danville's water system
No health-based violations since 2016
Serves about 10,500 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 1
- Open now
- 0
EPA lists Danville Water Works as the system serving Danville. The hardness figure above comes from a different system's report, which TapWaterData uses for Danville.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Danville water hard?
Yes. It measures about 178 mg/L (10.4 grains per gallon), which the USGS classes as hard.
What is the water hardness in Danville in grains per gallon?
About 10.4 gpg. One grain per gallon equals 17.1 mg/L, so 178 mg/L divided by 17.1 gives 10.4.
What size water softener do I need in Danville?
For 3 people using 75 gallons each per day, 10.4 gpg works out to about 2,342 grains a day. A 24,000-grain softener covers that with a regeneration about every 10 days.
Has the Danville water system had EPA violations?
EPA records show no health-based violations for Danville Water Works since 2016. There were also 1 monitoring or reporting violation, which are about late or missing tests and notices.
Nearby cities
- Avon178 mg/LHard
- Brownsburg181 mg/LVery hard
- Plainfield178 mg/LHard
- Mooresville178 mg/LHard
- Speedway178 mg/LHard
- Whitestown178 mg/LHard
- Zionsville178 mg/LHard
- Indianapolis178 mg/LHard
- Lebanon272 mg/LVery hard
- Beech Grove178 mg/LHard
Hardness data: TapWaterData US Water Hardness (utility report, August 25, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.