Hard water in St. Matthews, KY
Reported by Louisville Water Company · September 2025
- KY typical
- 134 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
Tap water in St. Matthews has about 134 mg/L of hardness, which is 7.8 grains per gallon. On the USGS scale that counts as hard. The number comes from Louisville Water Company, dated September 2025. Reports for this system disagree, with values from 134 to 155 mg/L.
St. Matthews sits close to the typical Kentucky figure of 134 mg/L. Of the 10 nearest cities we track, 4 have softer water and 5 have harder. The range nearby runs from 70 mg/L in Union to 199 in Frankfort.
What 134 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 134 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 7.8 gpg = 1,764 grains a day. A 24,000-grain unit regenerates about every 13 days.
EPA record for St. Matthews's water system
No health-based violations since 2016
Serves about 806,997 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 0
- Open now
- 0
TapWaterData ties St. Matthews to this system. EPA's service-area records do not name St. Matthews, so check the utility printed on your water bill.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is St. Matthews water hard?
Yes. It measures about 134 mg/L (7.8 grains per gallon), which the USGS classes as hard.
What is the water hardness in St. Matthews in grains per gallon?
About 7.8 gpg. One grain per gallon equals 17.1 mg/L, so 134 mg/L divided by 17.1 gives 7.8.
What size water softener do I need in St. Matthews?
For 3 people using 75 gallons each per day, 7.8 gpg works out to about 1,764 grains a day. A 24,000-grain softener covers that with a regeneration about every 13 days.
Has the St. Matthews water system had EPA violations?
EPA records show no health-based violations for Louisville Water Company since 2016.
Nearby cities
- Louisville134 mg/LHard
- Radcliff186 mg/LVery hard
- Elizabethtown186 mg/LVery hard
- Frankfort199 mg/LVery hard
- Nicholasville160 mg/LHard
- Lexington158 mg/LHard
- Walton110 mg/LModerately hard
- Union70 mg/LModerately hard
- Burlington70 mg/LModerately hard
- Oakbrook70 mg/LModerately hard
Hardness data: TapWaterData US Water Hardness (utility report, September 15, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.