Hard water in St. Anthony, MN
Reported by Saint Anthony Village · June 2025
- MN typical
- 160 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
St. Anthony water measures 254 mg/L (14.8 gpg) of hardness, very hard by USGS standards. The number comes from Saint Anthony Village, dated June 2025.
At 254 mg/L, St. Anthony is 94 mg/L above the typical Minnesota figure of 160. None of the 10 nearest cities we track has harder water. The range nearby runs from 56 mg/L in Maplewood to 230 in New Brighton.
What 254 mg/L means at home
Scale forms fast here. Kettles and coffee makers need regular descaling, and showerheads clog unless you clean them.
Tank water heaters collect mineral sediment that insulates the water from the burner, so flushing the tank matters more than usual.
Dishes and glass shower doors spot easily. Soap scum and a dull film on hair or laundry are common complaints.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 254 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 14.8 gpg = 3,341 grains a day. A 24,000-grain unit regenerates about every 7 days.
EPA record for St. Anthony's water system
No health-based violations since 2016
Serves about 9,500 people from groundwater.
- Health-based
- 0
- Monitoring or reporting
- 0
- Open now
- 0
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is St. Anthony water hard?
Yes. It measures about 254 mg/L (14.8 grains per gallon), which the USGS classes as very hard.
What is the water hardness in St. Anthony in grains per gallon?
About 14.8 gpg. One grain per gallon equals 17.1 mg/L, so 254 mg/L divided by 17.1 gives 14.8.
What size water softener do I need in St. Anthony?
For 3 people using 75 gallons each per day, 14.8 gpg works out to about 3,341 grains a day. A 24,000-grain softener covers that with a regeneration about every 7 days.
Has the St. Anthony water system had EPA violations?
EPA records show no health-based violations for Saint Anthony Village since 2016.
Nearby cities
- New Brighton230 mg/LVery hard
- Roseville78 mg/LModerately hard
- Shoreview192 mg/LVery hard
- Minneapolis89 mg/LModerately hard
- Brooklyn Center79 mg/LModerately hard
- Robbinsdale201 mg/LVery hard
- Golden Valley90 mg/LModerately hard
- St. Paul82 mg/LModerately hard
- Brooklyn Park120 mg/LModerately hard
- Maplewood56 mg/LSoft
Hardness data: TapWaterData US Water Hardness (utility report, June 10, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.