Hard water in Maryland Heights, MO
Reported by Mo American ST Louis ST Charles Counties · May 2025
- MO typical
- 121 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
The water in Maryland Heights carries roughly 121 mg/L of dissolved calcium and magnesium, or 7.1 grains per gallon. That is hard water. The number comes from Mo American ST Louis ST Charles Counties, dated May 2025.
At 121 mg/L, Maryland Heights is close to the typical Missouri figure of 121 mg/L. Of the 10 nearest cities we track, 3 have softer water and 6 have harder. The range nearby runs from 104 mg/L in Murphy to 263 in Des Peres.
What 121 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 121 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 7.1 gpg = 1,593 grains a day. A 24,000-grain unit regenerates about every 15 days.
EPA record for Maryland Heights's water system
No health-based violations since 2016
Serves about 1,111,000 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 0
- Open now
- 0
TapWaterData ties Maryland Heights to this system. EPA's service-area records do not name Maryland Heights, so check the utility printed on your water bill.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Maryland Heights water hard?
Yes. It measures about 121 mg/L (7.1 grains per gallon), which the USGS classes as hard.
What is the water hardness in Maryland Heights in grains per gallon?
About 7.1 gpg. One grain per gallon equals 17.1 mg/L, so 121 mg/L divided by 17.1 gives 7.1.
What size water softener do I need in Maryland Heights?
For 3 people using 75 gallons each per day, 7.1 gpg works out to about 1,593 grains a day. A 24,000-grain softener covers that with a regeneration about every 15 days.
Has the Maryland Heights water system had EPA violations?
EPA records show no health-based violations for Mo American ST Louis ST Charles Counties since 2016.
Nearby cities
- Town and Country234 mg/LVery hard
- Chesterfield121 mg/LHard
- Ladue155 mg/LHard
- Des Peres263 mg/LVery hard
- St. Peters168 mg/LHard
- Ballwin242 mg/LVery hard
- Kirkwood130 mg/LHard
- Cottleville120 mg/LHard
- St. Louis109 mg/LModerately hard
- Murphy104 mg/LModerately hard
Hardness data: TapWaterData US Water Hardness (utility report, May 20, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.