Hard water in Park Hills, MO
Calculated from the utility's calcium and magnesium results · December 2020
- MO typical
- 121 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 64k grain
- Data
- Calculated from utility data
Tap water in Park Hills has about 565 mg/L of hardness, which is 33.0 grains per gallon. On the USGS scale that counts as very hard. TapWaterData worked it out from the calcium and magnesium levels the local utility reports (December 2020).
At 565 mg/L, Park Hills is 444 mg/L above the typical Missouri figure of 121. None of the 10 nearest cities we track has harder water. The range nearby runs from 79 mg/L in Eureka to 346 in Herculaneum.
What 565 mg/L means at home
Scale forms fast here. Kettles and coffee makers need regular descaling, and showerheads clog unless you clean them.
Tank water heaters collect mineral sediment that insulates the water from the burner, so flushing the tank matters more than usual.
Dishes and glass shower doors spot easily. Soap scum and a dull film on hair or laundry are common complaints.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 565 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 33.0 gpg = 7,430 grains a day. A 64,000-grain unit regenerates about every 8 days.
EPA record for Park Hills's water system
No health-based violations since 2016
Serves about 8,587 people from groundwater.
- Health-based
- 0
- Monitoring or reporting
- 0
- Open now
- 0
EPA lists this system as serving Park Hills.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Park Hills water hard?
Yes. It measures about 565 mg/L (33.0 grains per gallon), which the USGS classes as very hard.
What is the water hardness in Park Hills in grains per gallon?
About 33.0 gpg. One grain per gallon equals 17.1 mg/L, so 565 mg/L divided by 17.1 gives 33.0.
What size water softener do I need in Park Hills?
For 3 people using 75 gallons each per day, 33.0 gpg works out to about 7,430 grains a day. A 64,000-grain softener covers that with a regeneration about every 8 days.
Has the Park Hills water system had EPA violations?
EPA records show no health-based violations for Park Hills PWS since 2016.
Nearby cities
- Farmington276 mg/LVery hard
- Bonne Terre339 mg/LVery hard
- De Soto312 mg/LVery hard
- Festus247 mg/LVery hard
- Herculaneum346 mg/LVery hard
- Pevely308 mg/LVery hard
- Arnold212 mg/LVery hard
- Sullivan188 mg/LVery hard
- Murphy104 mg/LModerately hard
- Eureka79 mg/LModerately hard
Hardness data: TapWaterData US Water Hardness (calculated from utility data, December 21, 2020), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.