Millville, NJ water hardness
County estimate from 573 water samples in Cumberland County · July 2026
- NJ typical
- 80 mg/L
- EPA health violations since 2016
- 1
- Data
- County estimate
Water samples from around Millville put hardness at about 26 mg/L (1.5 gpg), which would be soft on the USGS scale. Treat this as a rough guide: it is the median of 573 samples taken across Cumberland County, mostly wells and streams, not a test of Millville's treated tap water.
At 26 mg/L, Millville is 54 mg/L below the typical New Jersey figure of 80. Of the 10 nearest cities we track, 5 have softer water and 3 have harder. The range nearby runs from 21 mg/L in Somers Point to 64 in Villas.
What 26 mg/L means at home
Soap and shampoo lather with very little product. Kettles and showerheads stay mostly free of white crust.
Some people notice that soap feels slow to rinse off in soft water. That slippery feel is normal and harmless.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
Nothing, as far as hardness goes. At 26 mg/L a softener would have almost nothing to remove.
Carbon filter
If the water tastes of chlorine, a pitcher or faucet carbon filter takes care of that. It does not change hardness.
EPA record for Millville's water system
1 health-based violation since 2016
Serves about 27,500 people from groundwater.
- Health-based
- 1
- Monitoring or reporting
- 107
- Open now
- 1
EPA lists this system as serving Millville.
| Contaminant or rule | Violations | Period | Status |
|---|---|---|---|
| Lead and Copper Rulecorrosion control and lead sampling | 1 | 2023 | Resolved |
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Millville water hard?
No. It measures about 26 mg/L (1.5 grains per gallon), which the USGS classes as soft.
What is the water hardness in Millville in grains per gallon?
About 1.5 gpg. One grain per gallon equals 17.1 mg/L, so 26 mg/L divided by 17.1 gives 1.5.
Has the Millville water system had EPA violations?
EPA records show 1 health-based violation for Millville Water Department since 2016, involving Lead and Copper Rule. There were also 107 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Vineland26 mg/LSoft
- Bridgeton26 mg/LSoft
- Williamstown22 mg/LSoft
- Glassboro37 mg/LSoft
- Somers Point21 mg/LSoft
- Sicklerville43 mg/LSoft
- Bargaintown21 mg/LSoft
- Linwood21 mg/LSoft
- Villas64 mg/LModerately hard
- Northfield21 mg/LSoft
Hardness data: TapWaterData US Water Hardness (county estimate, July 4, 2026), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.