Statesville, NC water hardness
County estimate from 167 water samples in Iredell County · July 2026
- NC typical
- 31 mg/L
- EPA health violations since 2016
- 2
- Data
- County estimate
Water samples from around Statesville put hardness at about 19 mg/L (1.1 gpg), which would be soft on the USGS scale. Treat this as a rough guide: it is the median of 167 samples taken across Iredell County, mostly wells and streams, not a test of Statesville's treated tap water. One more reason for caution: EPA lists Statesville's water system as using surface water, which is often softer than the wells behind the county figure.
Statesville sits 12 mg/L below the typical North Carolina figure of 31. Of the 10 nearest cities we track, 2 have softer water and 8 have harder. The range nearby runs from 14 mg/L in Westport to 58 in Kannapolis.
What 19 mg/L means at home
Soap and shampoo lather with very little product. Kettles and showerheads stay mostly free of white crust.
Some people notice that soap feels slow to rinse off in soft water. That slippery feel is normal and harmless.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
Nothing, as far as hardness goes. At 19 mg/L a softener would have almost nothing to remove.
Carbon filter
If the water tastes of chlorine, a pitcher or faucet carbon filter takes care of that. It does not change hardness.
EPA record for Statesville's water system
2 health-based violations since 2016
Serves about 30,843 people from surface water.
- Health-based
- 2
- Monitoring or reporting
- 1
- Open now
- 0
EPA lists this system as serving Statesville.
| Contaminant or rule | Violations | Period | Status |
|---|---|---|---|
| Lead and Copper Rulecorrosion control and lead sampling | 1 | 2024 | Resolved |
| Surface Water Treatment Rulefiltration and disinfection | 1 | 2017 | Resolved |
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Statesville water hard?
No. It measures about 19 mg/L (1.1 grains per gallon), which the USGS classes as soft.
What is the water hardness in Statesville in grains per gallon?
About 1.1 gpg. One grain per gallon equals 17.1 mg/L, so 19 mg/L divided by 17.1 gives 1.1.
Has the Statesville water system had EPA violations?
EPA records show 2 health-based violations for Statesville, City of since 2016, involving Lead and Copper Rule, Surface Water Treatment Rule. There were also 1 monitoring or reporting violation, which are about late or missing tests and notices.
Nearby cities
- Mooresville51 mg/LSoft
- Westport14 mg/LSoft
- Davidson31 mg/LSoft
- Cornelius31 mg/LSoft
- St. Stephens23 mg/LSoft
- Salisbury40 mg/LSoft
- Kannapolis58 mg/LSoft
- Hickory23 mg/LSoft
- Huntersville31 mg/LSoft
- Lincolnton14 mg/LSoft
All 101 cities in North Carolina
Hardness data: TapWaterData US Water Hardness (county estimate, July 4, 2026), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.