How hard is the water in Millersville, PA?
Reported by City of Lancaster · September 2025
- PA typical
- 127 mg/L
- EPA health violations since 2016
- 2
- Softener for 3 people
- 24k grain
- Data
- Utility report
The water in Millersville carries roughly 120 mg/L of dissolved calcium and magnesium, or 7.0 grains per gallon. That is moderately hard water. The number comes from City of Lancaster, dated September 2025.
At 120 mg/L, Millersville is close to the typical Pennsylvania figure of 127 mg/L. Of the 10 nearest cities we track, 6 have softer water and 2 have harder. The range nearby runs from 57 mg/L in Middletown to 266 in Lebanon.
What 120 mg/L means at home
You may see faint white spots on glasses and shower doors after the water dries.
Scale builds up slowly. A kettle or coffee maker needs descaling now and then, maybe every few months.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
Optional. Plenty of households at this level live with it and descale the kettle now and then.
Water softener
Worth a look if spots on glass bother you, or if your tankless water heater manual asks for softer water.
Carbon filter
Improves taste and removes chlorine. It leaves calcium and magnesium in place.
3 people × 75 gallons a day × 7.0 gpg = 1,580 grains a day. A 24,000-grain unit regenerates about every 15 days.
EPA record for Millersville's water system
2 health-based violations since 2016
Serves about 120,000 people from surface water.
- Health-based
- 2
- Monitoring or reporting
- 2
- Open now
- 0
TapWaterData ties Millersville to this system. EPA's service-area records do not name Millersville, so check the utility printed on your water bill.
| Contaminant or rule | Violations | Period | Status |
|---|---|---|---|
| Total trihalomethanes (TTHM)a disinfection byproduct | 1 | 2024 | Resolved |
| Haloacetic acids (HAA5)a disinfection byproduct | 1 | 2016 | Resolved |
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Millersville water hard?
Somewhat. It measures about 120 mg/L (7.0 grains per gallon), which the USGS classes as moderately hard.
What is the water hardness in Millersville in grains per gallon?
About 7.0 gpg. One grain per gallon equals 17.1 mg/L, so 120 mg/L divided by 17.1 gives 7.0.
What size water softener do I need in Millersville?
For 3 people using 75 gallons each per day, 7.0 gpg works out to about 1,580 grains a day. A 24,000-grain softener covers that with a regeneration about every 15 days.
Has the Millersville water system had EPA violations?
EPA records show 2 health-based violations for City of Lancaster since 2016, involving Total trihalomethanes (TTHM), Haloacetic acids (HAA5). There were also 2 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Lancaster120 mg/LModerately hard
- Willow Street120 mg/LModerately hard
- Mount Joy93 mg/LModerately hard
- Elizabethtown255 mg/LVery hard
- East York83 mg/LModerately hard
- York83 mg/LModerately hard
- West York83 mg/LModerately hard
- Shiloh83 mg/LModerately hard
- Lebanon266 mg/LVery hard
- Middletown57 mg/LSoft
All 172 cities in Pennsylvania
Hardness data: TapWaterData US Water Hardness (utility report, September 16, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.