How hard is the water in Bloomingdale, TN?
Reported by Kingsport Water Dept · September 2025
- TN typical
- 89 mg/L
- EPA health violations since 2016
- 1
- Softener for 3 people
- 24k grain
- Data
- Utility report
Bloomingdale water measures 106 mg/L (6.2 gpg) of hardness, moderately hard by USGS standards. The number comes from Kingsport Water Dept, dated September 2025.
At 106 mg/L, Bloomingdale is 17 mg/L above the typical Tennessee figure of 89. Of the 10 nearest cities we track, 7 have softer water and 2 have harder. The range nearby runs from 37 mg/L in Alcoa to 260 in Morristown.
What 106 mg/L means at home
You may see faint white spots on glasses and shower doors after the water dries.
Scale builds up slowly. A kettle or coffee maker needs descaling now and then, maybe every few months.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
Optional. Plenty of households at this level live with it and descale the kettle now and then.
Water softener
Worth a look if spots on glass bother you, or if your tankless water heater manual asks for softer water.
Carbon filter
Improves taste and removes chlorine. It leaves calcium and magnesium in place.
3 people × 75 gallons a day × 6.2 gpg = 1,395 grains a day. A 24,000-grain unit regenerates about every 17 days.
EPA record for Bloomingdale's water system
1 health-based violation since 2016
Serves about 13,318 people from surface water.
- Health-based
- 1
- Monitoring or reporting
- 4
- Open now
- 0
EPA lists Bloomingdale Utility District as the system serving Bloomingdale. The hardness figure above comes from a different system's report, which TapWaterData uses for Bloomingdale.
| Contaminant or rule | Violations | Period | Status |
|---|---|---|---|
| Surface Water Treatment Rule (LT2)filtration and disinfection | 1 | 2019 | Resolved |
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Bloomingdale water hard?
Somewhat. It measures about 106 mg/L (6.2 grains per gallon), which the USGS classes as moderately hard.
What is the water hardness in Bloomingdale in grains per gallon?
About 6.2 gpg. One grain per gallon equals 17.1 mg/L, so 106 mg/L divided by 17.1 gives 6.2.
What size water softener do I need in Bloomingdale?
For 3 people using 75 gallons each per day, 6.2 gpg works out to about 1,395 grains a day. A 24,000-grain softener covers that with a regeneration about every 17 days.
Has the Bloomingdale water system had EPA violations?
EPA records show 1 health-based violation for Bloomingdale Utility District since 2016, involving Surface Water Treatment Rule (LT2). There were also 4 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Kingsport106 mg/LModerately hard
- Bristol88 mg/LModerately hard
- Johnson City60 mg/LSoft
- Morristown260 mg/LVery hard
- Knoxville91 mg/LModerately hard
- Powell99 mg/LModerately hard
- Eagleton Village46 mg/LSoft
- Alcoa37 mg/LSoft
- Maryville42 mg/LSoft
- Oak Ridge132 mg/LHard
Hardness data: TapWaterData US Water Hardness (utility report, September 26, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.