Maltby, WA water hardness

Tap water hardness
16mg/L
0.9gpg
Soft

Reported by Alderwood Water District · September 2025

WA typical
36 mg/L
EPA health violations since 2016
0
Data
Utility report

Maltby water measures 16 mg/L (0.9 gpg) of hardness, soft by USGS standards. The number comes from Alderwood Water District, dated September 2025.

Maltby on the hardness scale, with nearby cities
060120180240300360+WA typical 36Bothell East: 13 mg/LBothell East 13Mill Creek East: 13 mg/LMill Creek East 13Bothell West: 13 mg/LBothell West 13Mill Creek: 13 mg/LMill Creek 13Martha Lake: 13 mg/LMartha Lake 13Bothell: 19 mg/LBothell 19Woodinville: 25 mg/LWoodinville 25Cottage Lake: 25 mg/LCottage Lake 25Monroe: 29 mg/LMonroe 29Silver Firs: 43 mg/LSilver Firs 43Maltby 16mg/L as calcium carbonate060120180240300360+WA 36Bothell East: 13 mg/LBothell Ea. 13Mill Creek East: 13 mg/LMill Creek. 13Bothell: 19 mg/LBothell 19Woodinville: 25 mg/LWoodinville 25Cottage Lake: 25 mg/LCottage La. 25Silver Firs: 43 mg/LSilver Firs 4316 mg/Lmg/L as calcium carbonate
Soft 0–60 mg/LModerately hard 61–120 mg/LHard 121–180 mg/LVery hard 181+ mg/L

At 16 mg/L, Maltby is 20 mg/L below the typical Washington figure of 36. Of the 10 nearest cities we track, 5 have softer water and 5 have harder. The range nearby runs from 13 mg/L in Bothell East to 43 in Silver Firs.

What 16 mg/L means at home

Soap and shampoo lather with very little product. Kettles and showerheads stay mostly free of white crust.

Some people notice that soap feels slow to rinse off in soft water. That slippery feel is normal and harmless.

Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.

What to do about it

Nothing, as far as hardness goes. At 16 mg/L a softener would have almost nothing to remove.

Carbon filter

If the water tastes of chlorine, a pitcher or faucet carbon filter takes care of that. It does not change hardness.

EPA record for Maltby's water system

Alderwood Water District · PWSID WA5301300

No health-based violations since 2016

Serves about 245,715 people from surface water.

Health-based
0
Monitoring or reporting
0
Open now
0

TapWaterData ties Maltby to this system. EPA's service-area records do not name Maltby, so check the utility printed on your water bill.

Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.

Questions

Is Maltby water hard?

No. It measures about 16 mg/L (0.9 grains per gallon), which the USGS classes as soft.

What is the water hardness in Maltby in grains per gallon?

About 0.9 gpg. One grain per gallon equals 17.1 mg/L, so 16 mg/L divided by 17.1 gives 0.9.

Has the Maltby water system had EPA violations?

EPA records show no health-based violations for Alderwood Water District since 2016.

Nearby cities

All 145 cities in Washington

Hardness data: TapWaterData US Water Hardness (utility report, September 15, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.