Hard water in Glenview, IL
County estimate from 2,738 water samples in Cook County · July 2026
- IL typical
- 139 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- County estimate
Water samples from around Glenview put hardness at about 229 mg/L (13.4 gpg), which would be very hard on the USGS scale. Treat this as a rough guide: it is the median of 2,738 samples taken across Cook County, mostly wells and streams, not a test of Glenview's treated tap water. One more reason for caution: EPA lists Glenview's water system as using surface water, which is often softer than the wells behind the county figure.
Glenview sits 90 mg/L above the typical Illinois figure of 139. None of the 10 nearest cities we track has harder water. The range nearby runs from 112 mg/L in Mount Prospect to 229 in Morton Grove.
What 229 mg/L means at home
Scale forms fast here. Kettles and coffee makers need regular descaling, and showerheads clog unless you clean them.
Tank water heaters collect mineral sediment that insulates the water from the burner, so flushing the tank matters more than usual.
Dishes and glass shower doors spot easily. Soap scum and a dull film on hair or laundry are common complaints.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 229 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 13.4 gpg = 3,013 grains a day. A 24,000-grain unit regenerates about every 7 days.
EPA record for Glenview's water system
No health-based violations since 2016
Serves about 47,856 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 5
- Open now
- 0
EPA lists this system as serving Glenview.
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Glenview water hard?
Yes. It measures about 229 mg/L (13.4 grains per gallon), which the USGS classes as very hard.
What is the water hardness in Glenview in grains per gallon?
About 13.4 gpg. One grain per gallon equals 17.1 mg/L, so 229 mg/L divided by 17.1 gives 13.4.
What size water softener do I need in Glenview?
For 3 people using 75 gallons each per day, 13.4 gpg works out to about 3,013 grains a day. A 24,000-grain softener covers that with a regeneration about every 7 days.
Has the Glenview water system had EPA violations?
EPA records show no health-based violations for Glenview since 2016. There were also 5 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Northbrook131 mg/LHard
- Morton Grove229 mg/LVery hard
- Winnetka135 mg/LHard
- Wilmette138 mg/LHard
- Des Plaines126 mg/LHard
- Skokie132 mg/LHard
- Wheeling132 mg/LHard
- Deerfield135 mg/LHard
- Mount Prospect112 mg/LModerately hard
- Evanston135 mg/LHard
Hardness data: TapWaterData US Water Hardness (county estimate, July 4, 2026), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.