Hard water in Wilmette, IL
Reported by Wilmette · September 2025
- IL typical
- 139 mg/L
- EPA health violations since 2016
- 0
- Softener for 3 people
- 24k grain
- Data
- Utility report
Wilmette water measures 138 mg/L (8.1 gpg) of hardness, hard by USGS standards. The number comes from Wilmette, dated September 2025.
At 138 mg/L, Wilmette is close to the typical Illinois figure of 139 mg/L. Of the 10 nearest cities we track, 8 have softer water and 2 have harder. The range nearby runs from 120 mg/L in Highwood to 229 in Morton Grove.
What 138 mg/L means at home
Expect white crust on faucets and showerheads, plus spots on dishes that come out of the dishwasher.
Kettles collect scale quickly. Water heaters build up sediment at the bottom of the tank, which makes them work harder over time.
Soap and detergent need a little more to lather, and soap scum shows up in the tub.
Hardness is not a health problem, and EPA sets no limit for it. It is a matter of scale and soap.
What to do about it
At 138 mg/L most of the trouble is scale, and only a few things deal with it.
Ion-exchange water softener
The standard whole-house fix. It swaps calcium and magnesium for sodium or potassium and needs salt plus a drain. Size it with the calculator below.
Salt-free conditioner
No salt and no drain line. It changes how minerals form scale instead of removing them, so water still tests hard.
Reverse osmosis or carbon filter
Under-sink reverse osmosis removes minerals from drinking water only. Plain carbon filters improve taste but do not soften.
3 people × 75 gallons a day × 8.1 gpg = 1,816 grains a day. A 24,000-grain unit regenerates about every 13 days.
EPA record for Wilmette's water system
No health-based violations since 2016
Serves about 27,650 people from surface water.
- Health-based
- 0
- Monitoring or reporting
- 3
- Open now
- 1
Health-based means a contaminant above its legal limit or a missed treatment step. Monitoring and reporting violations are late or missing tests and notices. Source: EPA ECHO, 2026Q3 export, violations with periods starting 2016 or later. Full EPA record.
Questions
Is Wilmette water hard?
Yes. It measures about 138 mg/L (8.1 grains per gallon), which the USGS classes as hard.
What is the water hardness in Wilmette in grains per gallon?
About 8.1 gpg. One grain per gallon equals 17.1 mg/L, so 138 mg/L divided by 17.1 gives 8.1.
What size water softener do I need in Wilmette?
For 3 people using 75 gallons each per day, 8.1 gpg works out to about 1,816 grains a day. A 24,000-grain softener covers that with a regeneration about every 13 days.
Has the Wilmette water system had EPA violations?
EPA records show no health-based violations for Wilmette since 2016. There were also 3 monitoring or reporting violations, which are about late or missing tests and notices.
Nearby cities
- Winnetka135 mg/LHard
- Evanston135 mg/LHard
- Skokie132 mg/LHard
- Morton Grove229 mg/LVery hard
- Lincolnwood136 mg/LHard
- Glenview229 mg/LVery hard
- Northbrook131 mg/LHard
- Deerfield135 mg/LHard
- Des Plaines126 mg/LHard
- Highwood120 mg/LModerately hard
Hardness data: TapWaterData US Water Hardness (utility report, September 10, 2025), CC BY 4.0. Population: US Census Bureau. Violations: EPA ECHO. How we use them.